<< Click to Display Table of Contents >> Navigation: Setup Instructions for 7thSense 3D Sync using Labjack > LabJack 7thSense Pinout and Connections |
Parts Required
•LabJack Package. Containing:
oLabJack U3-LV
oUSB cable (1.8m)
•LabJack 3D Sync Cable Assembly. A 15-way D plug terminated with cables to:
o3 pin Mini-DIN plugs - 1 cable for the Leader server, 1 for each Follower server.
oBNC plug - Cable to 3D glasses emitter/projector
The default length for each cable is 1m.
Wiring Information
USB cable: Connect between USB ports on the LabJack unit and the Leader server.
LabJack 3D Sync Cable Assembly (Leader and Single Follower Server)
•15 Way D Plug connects to the LabJack unit.
•Mini-DIN plug marked ‘M’ to the Leader server graphics card’s 3D sync connector.
•Mini-DIN plug marked ‘S’ to the Follower server graphics card’s 3D sync connector.
•BNC plug to the 3D glasses emitter or projector as required.
Signals (Leader and Single Follower Server)
Signal |
Leader Server |
Follower Server |
LabJack |
3D glasses emitter |
---|---|---|---|---|
Leader Sync |
Pin 3 |
No Connection |
Pin 4 |
Centre Pin |
Follower Sync |
No Connection |
Pin 3 |
Pin 12 |
No Connection |
Gnd |
Pin 2 |
Pin 2 |
Pin 8 |
Outer Shell |
Leader and 2 or More Follower Servers
Additional servers are connected from Pin 3 of their 3 pin Mini-DIN connector to the appropriate LabJack 15-way D connector pin:
Signal |
LabJack |
Follower Server |
---|---|---|
Follower 1 Sync |
Pin 12 (EIO1) |
S1 |
Follower 2 Sync |
Pin 5 (EIO2) |
S2 |
Follower 3 Sync |
Pin 13 (EIO3) |
S3 |
Follower 4 Sync |
Pin 6 (EIO4) |
S4 |
All Gnd signals are connected from the Follower Server 3 pin Mini-DIN plugs pin 2 to the LabJack 15-way D connector pin 8.
Page edited [d/m/y]: 02/07/2021