|
<< Click to Display Table of Contents >> Navigation: DeltaShowControlInterface > Control Logic for Sequences (Mode=1) |
Delta sequences can be written and saved to the filenames shown below. The name is addressed and the sequence is run.
The software control is configured using this logic table (DI = digital inputs):
DI 0 (pulsed) |
= load sequence “digitalinput_b0_s1” (on) = load sequence “digitalinput_b0_s0” (off) |
DI 1 (pulsed) |
= load sequence “digitalinput_b1_s1” (on) = load sequence “digitalinput_b1_s0” (off) |
DI 2 (pulsed) |
= load sequence “digitalinput_b2_s1” (on) = load sequence “digitalinput_b2_s0” (off) |
DI 3 (pulsed) |
= load sequence “digitalinput_b3_s1” (on) = load sequence “digitalinput_b3_s0” (off) |
DI 4 (pulsed) |
= load sequence “digitalinput_b4_s1” (on) = load sequence “digitalinput_b4_s0” (off) |
DI 5 (pulsed) |
= load sequence “digitalinput_b5_s1” (on) = load sequence “digitalinput_b5_s0” (off) |
Page edited [d/m/y]: 29/11/2018