Important When sharing media across multiple servers, each controls its own channel(s). For media to be carved effectively, the settings for each channel must be set according to the individual projection requirements. If the projectors are subsequently moved, and are realigned, carved channels may no longer overlap and blend correctly. In these circumstances, the media would have to be re-carved with new channel settings. |
The instructions show how to carve media on a Leader server then share across Leader/Follower servers, using manual calibration. See the alternative instructions for Domes with Scalable Auto-alignment.
Note: if the whole movie is too large to fit on the server disk in a single session, carve your media in ‘batches’ of files/frames. |
Show Setup: DeltaGUI
Create a new show on your Leader server, where you will carve the media:
Click File > New and Select ‘Resources and Configuration’ and ‘Clear Background’ to clear down all previous configurations.
Choose Display > Dome Mode.
If you are unfamiliar with working in Dome Mode (previously termed Frustum Mode in earlier DeltaGUI versions), please refer to the Delta User Guide in the appropriate version for your system.
Page edited [d/m/y]: 10/12/2020