Follow the normal procedures for setting up your projector channels for Dome Mode (see the main Delta User Guide). Click on the Defaults Wizard to set initial Dome Mode Defaults. If aligning manually, the settings you use may come from a CAD 3D model.
Select ‘Force n Channels’ and the number of channels that you are using, and other settings, then click ‘Apply’ and ‘Done’ to close.
When you have finished a manual alignment, with small adjustments in the Dome Mode Channel panel, make a note of these final settings for each channel. Minor movements in projectors from regular maintenance may again be made manually.
When you carve media to these configurations, the result will only apply to them, with a small amount of tolerance. More substantial realignment may require re-carving of the media. |
Page edited [d/m/y]: 11/08/2017