Delta Media Server Front Panel

<< Click to Display Table of Contents >>

Navigation:  »No topics above this level«

Delta Media Server Front Panel

In Delta Media Servers (Infinity, Nucleus, Proton, Nano) the front panel display and interaction is controlled by the DeltaMonitor application.

On Delta 1.5 servers the functionality is limited. Delta 2 added a significant amount of additional functionality. Delta 2.4 saw more software changes to allow for NICs to be modified in all servers (including Nano) without having to enter Service Mode, and with further options for NIC modification throughout. From DeltaMonitor v. 3.0.30 a Konami code was added to lock the front panel controls, and from v.3.0.31, the DeltaGUI connection was added, and warning of licence expiry.

Terminology

Embedded Server – This refers to the Operating system on the server. The embedded servers include: Nano, Nano4K and Duo II pre-2016, and Nano1, Nano2, Nano3, Nano4K in the 2016 server range. (For further information see the Service Mode Section.)

Pico servers

Pico servers do not share the same front panel controls, and have a single LED indicator on the left:

pico-front-face-led

led-lit-green 

Green

The Pico is on and Delta is running.

led-lit-amber 

Amber

The server is on and Delta is not running.

led-lit-green/led-lit-amber 

Flashing green and amber

Server identification state – the IP has been called externally with a GPIO_ID command (works only when Delta is running). after 15 seconds reverts to green. The DeltaFinder utility operates this mode.

 

Download (new window)

Download this guide as PDF

 

Page edited [d/m/y]: 07/12/2022