To enable all outputs in Composition Mode to carry the IntelligentSource data row, a small adjustment must be made.
With IntelligentSource data stream enabled, you will see the data row visible as the top pixel row in the Playback Window. In Composition Mode, you will initially only see this in the first (top left) output, so you must restore it to every output.
In Display > Output Setup, make sure that you remain in Composition Mode and that using the drop-down boxes beneath ‘Matrix Mode’, you represent the same output arrangement as your graphics driver (e.g. NVIDIA Mosaic).
You will now see the IntelligentSource data row flickering in the top of each output in the Playback Window.
Page edited [d/m/y]: 18/03/2022