•R-Series and P-Series media servers should be operated in a clean, dry, dust-free area.
•The server is intended for operation in benign environments; that is, not subject to corrosive or explosive atmospheres, moisture or flammable gases. The server is non-protected against ingress of liquid (IPx0).
•The server is not designed to be subject to excessive mechanical shock or vibration.
•This equipment is not suitable for use in locations where children are likely to be present.
|
Only used at altitude not exceeding 2000 m |
|
Only used in not-tropical climate regions |
Thermal
Do not block any of the server’s air vents and ensure the ambient temperature around the server is compatible with the environmental characteristics stated below.
Particularly when mounted in a rack cabinet with front or rear doors the ambient temperature around the server may be higher than the ambient room temperature.
Electrical
Before connecting power to the server, ensure that electricity supply is compatible with the electrical ratings stated on the server’s product label. The server shall not be connected to an IT (unearthed neutral) power distribution system and the mains socket-outlet used shall connect to the building installation ground.
The server is connected to and disconnected from the mains supply with the two IEC 60320 power connectors on the rear of the unit.
Page edited [d/m/y]: 15/08/2024