Menu: Configuration > Settings > Preferences
Use Local Render Settings
Compere allows users to retain all their own settings for how assembly panels are rendered, identified by the project, and stored in their Compere root folder, under \LocalRenderSettings.
UDP Remote Config Port
Remote discovery port: default 9103, configurable.
UDP remote Tx port
UDP port number to which external control will transmit.
UDP receive port
UDP port number external control socket will listen on.
TCP port
TCP port number external control socket will listen on
TCP connection timeout
Timeout on an existing TCP connection in seconds in which it'll be closed if no data is received. A negative value means there will be no expiry time.
Network binding NIC
Shows the IP address of the current instance of Compere.
UDP discovery port
UDP port used when discovering other Compere applications on the network (default 9999).
TCP connection port
TCP port on which connections will be made between instances of Compere for Project updates (default 5555).
External Control Adapter TCP Port
Port to address Juggers on, default 5584, configurable.
Locked
Check to avoid accidental changes in the panel.
Enable Debug UI Elements
Implements an additional Debug Menu for diagnostics.
➢See also: Ports Used by Juggler and Compere
File Locations
Compere Root Dir
Compere data is stored in: C:\Users\[UserName]\AppData\Local\Compere
Project Dir
Compere Project (.prj) files are stored by default on the Compere server device in: [Compere Root Dir]\Projects
Resources Dir
Compere Project Resources are stored by default in: [Compere Root Dir]\Resources. Add subfolders as required.
Layout Dir
Compere Layout (.lay) files are the arrangement of panels saved by the user. Their default location is: [Compere Root Dir]\Layouts.
Presets
Preset (.pre) files are saved to: [Compere Root Dir]\Presets.
Clones
Clone (.clo) files are saved to: [Compere Root Dir]\Clones.
Page edited [d/m/y]: 26/09/2022