This dialog allows you to set the resolution of a hardware preview card (if fitted) or preview recording output format. Note that larger resolutions create a larger load on the server and DeltaGUI.
Server (Hardware) Preview Format
If preview output hardware is fitted to the server (can be HDMI, SDI etc.), this drop-down allows configuration of the available output video format.
GUI (Network and Recording) Preview Format
Select one of the standard output formats or Custom, and type in the custom Width × Height in pixels. This format will be used when Preview Recording is activated either from the Recording dialog or external control.
Note: Preview Recording is controlled from external control or a sequence using the PREVIEWRECORD, PREVIEWRECORDSETTINGS, REFRESHMOVIE and DELETE_DISKMEDIA commands. |
WebRTC Preview
Enable WebRTC Preview
The streaming preview to web browsers can be enabled here, and the Peer Name and Port set – this requires a Delta Web Service / Signalling Server to be running.
NDI® Preview
Enable NDI Preview
Check this for Network Device Interface (NDI®) preview. Note that the NDI® preview size is that shown in Display > Preview Setup > Canvas Size. Your NDI® monitor will detect your server IP for selection and viewing. Other settings will depend on which NDI® monitor you are using.