Medialon MRCs' Help
Name: SoundLight DMX
Version: 6.7.2
Available for: Manager V7 and Manager V6 (Lite & Pro)
Limitation In:
Device Brand: SoundLight
Resources Types: DMX512

Overview:

SoundLight 1514PCI

The SoundLight DMX PCI is a versatile DMX–512 interface card that fits into any PC running Medialon Products with a PCI Slot:

The SoundLight DMX PCI offers up to 1024 DMX input channels or 1024 DMX output channels or combination (512 inputs and 512 outputs). This card handles two complete DMX in/out links in parallel. Up to four cards can be installed in one PC.

DMX Resources are managed by Medialon Products and no longer by the MXMs, as it was in previous version 3 of the software. DMX resources are used by MXM Medialon DMX512

Installation

No specific installation is required.

Setup

Resource Scanning

This MRC doesn’t support ressource scanning feature.

Setup

SoundLight resources are automatically detected on startup, they will appear as available DMX resources:

If you create a “Virtual” resource, the setup window will open to configure it:

If you wish to configure the DMX Resources, select a resource in the Lister and right click:

SoundLight DMX Resources configuration window will open:

Name

Name given to the resource.

Direction

Determines whether Input or Output.

Board

Select the Physical Board (maximum 4).

Connector

Lets you choose which connector is used for the DMX line. WARNING: At this time of writing, there is a known problem with the Soundlight resource: if you setup the resource as an input on connector A and an output on connector B, it does not work.

Patch

Any channel of the DMX resource can be redirected through a Patch modified to your needs:

Initial Output Level: You may choose to Reset all the Outputs to 0 when the project is started, or keep the last values that were sent.

Revisions

V 6.0.0

V 6.1.0

V 6.7.0