MRC List (Alphabetical)  MRC List (Category)
Medialon MRCs' Help
Name: ICP DAS Piso P32x32
Version: 6.7.2
Available for: Manager V7 and Manager V6 (Lite & Pro), Showmaster (Mini)
Limitation In:
Device Brand: ICP DAS
Resources Types: I/O

Overview

PISO P32C32/PISO P32A32 Board

The PISO-P32C32 and PISO-P32A32 have 32 channels of optically isolated digital inputs and 32 channels of optically isolated digital outputs, arranged into four isolated banks. Each input channel uses a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Each digital output offers a darlington (P32C32) or PNP (P32A32) transistor and integral suppression diode for inductive load. Isolated input channels 0–15 are designed into group A and channels 16–31 are designed into group B. Isolated output channels are designed into group C and Group D.

Wiring can be done using two DN–37 terminal board, one for each 16 channels group.

For more information, please refer to ICP DAS PISO documentation of web site: www.icpdas.com

ICP DAS PISO-P32x32 board is no longer managed by MXM IcpDas PC32x32 Board as it was in previous version of Medialon Manager. ICP DAS PISO-P32x32 board, Real or “Virtual”, Resources in your project will be accessed by the MXM Medialon IO.

Installation

Board Layout

This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. They have one 37-pin D-Sub Connector and one 40-pin male header. The 40-pin to DB–37 flat cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels:

The power supply of the input port may use the external power or the power from the PC side using DC/DC converter. The power supply of the output port should use the external power:

Wiring & Pin Assignment

Pin out of the board is matched to the pin out of the DN–37 terminal:

Digital Inputs with internal power supply

with external power supply

Digital Outputs

Current sinking (PISO-P32C32):

Current sourcing (PISO-P32A32):

For more information, please refer to ICP DAS PISO documentation of web site: www.icpdas.com

Setup

Resource Scanning

This MRC doesn’t support ressource scanning feature.

Setup

Medialon Products can manage ICP DAS PISO-P32x32 boards as Input/Output resources.

Select I/O Ports node to display ICP DAS PISO-P32x32 resources:

To add a new board:

Select New Resource Menu:

Select a board:

Click OK.

Revisions

V 6.0.0

V 6.1.0

V 6.7.0